SEM1605PV

Pt100 temperature transmitter with voltage output

• Suitable for Pt100 temperature sensors
• 3 wire (0 to 10) volt output
• PC Programmable
• High stability

The SEM1605PV is a DIN rail mounted Voltage Output temperature transmitter from Status Instruments. It has been designed to accept common RTD temperature sensor inputs and provide the user with a standard three wire (0 to 10) volt output signal. The output signal is linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard
USB cable between the SEM1605PV and your PC. Our free configuration software will guide you through any changes
you wish to make. To further help save time, the SEM1605PV does not need to be wired to a power supply
during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605PV is provided with a user push-button ranging option, allowing adjustments at both 0 V and 10 V against a live input. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation; during ‘user adjust’ it is also used to indicate the stage of adjustment. (0 and 10) V TRIM The buttons can also be used for 0 V and 10 V trim adjustment to add small offsets to (0 or 10) V output.

SENSOR REFERENCING

The SEM1605PV sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

SENSOR BURN OUT DETECTION

If a sensor wire is broken or becomes disconnected, the SEM1605PV output will automatically go to its user-defined level (upscale or downscale) or a pre-set value. STABILITY The SEM1605PV DIN rail transmitter incorporates digital technology to ensure accurate low-drift performance.

USB PC CONFIGURATION

The SEM1605PV is quick and easy to configure using a standard-type USB lead and the free-of-charge USBSpeedLink Windows software.

USB ANDROID VIEW

The SEM1605PV can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1605PV.

SEM1801/2 XTC

UKEX, ATEX, IECEx rail temperature transmitter for thermocouple sensors

• Suitable for use with thermocouples K, J, N, E, T, R, S, L, U, B, C(W5), D(W3), G(W)
• 4 to 20mA loop powered output
• Single and dual channel versions
• UKEX, ATEX and IECEx approved for hazardous areas

The SEM1801 / 2 XTC intrinsically safe temperature transmitter accepts thermocouple temperature sensors and converts the sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal. For use in hazardous areas, two versions are available: single or dual channel. The product is UKEX, ATEX and IECEx approved for hazardous areas.

PC configuration allows the user to select TC type, range, filter, units, linearisation and burnout direction, without requiring calibration equipment. Additionally, the user may read live process data when connected to the PC (in the safe area), this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process, therefore reducing system errors.

If required, the desired range can be specified at the time of order, removing the need for user configuration.
If the range is not specified, then the transmitter will be shipped with the default range of (0 to 1000) °C type K
burnout high and filter off.

INTRINSICALLY SAFE TRANSMITTER HIGHLIGHTS

SENSOR REFERENCING
The SEM1801/2XTC sensor referencing via the Windows based USBSpeedlink software allows for close
matching to a known reference sensor eliminating possible sensor errors.

THERMOCOUPLE TYPES
As standard the SEM1801/2TXC has all common thermocouple sensors available from its software library
with extra sensors available.

SENSOR BURN OUT DETECTION
If a sensor wire is broken or becomes disconnected the SEM1801/2XTC output will automatically go to its
user defined level (upscale or downscale) or a pre-set value.

STABILITY
The SEM1801/2TCX transmitter incorporates the latest digital technology to ensure accurate, low drift
performance.

SEM1801/2XR

UKEX, ATEX, IECEx rail temperature transmitter for RTD and potentiometer sensors

• Suitable for RTD and Potentiometer sensors
• UKEX, ATEX and IECEx approved for use in hazardous areas
• 4/20mA loop powered output
• Single or dual channel

The SEM1801/2XR UKEX, ATEX, IECEx temperature transmitter is designed for use with RTD or Potentiometer sensors and converts the sensor signal into an industry standard (4 to 20) mA loop powered output. PC configuration (in the safe area) allows the user to select sensor type, range, filter, tag, units and error signal without requiring calibration equipment.

Additionally, the user may read live process data when connected to the PC: this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process, therefore reducing system errors.

If required, the desired range can be specified at the time of order, removing the need for user configuration. If the
range is not specified then the transmitter will be shipped with the default range of Pt100 (0 to 100) °C, burnout high
and filter off.

UKEX, ATEX, IECEx TEMPERATURE TRANSMITTER FEATURE HIGHLIGHTS

SENSOR REFERENCING (Temperature mode)
The SEM1801/2XR sensor referencing via the Windows based USBSpeedlink software allows for close
matching to a known reference sensor eliminating possible sensor errors.

CUSTOM LINEARISATION
As standard the SEM1801/2XR has all common RTD sensors available from its software library.
Additionally, the SEM1801/2XR can be programmed with up to 22-point custom linearisation for ohms and
potentiometer inputs.

SENSOR BURN OUT DETECTION (Temperature mode)
If a sensor wire is broken or becomes disconnected the SEM1801/2XR output will automatically go to its
user defined level (upscale or downscale) or a pre-set value.

STABILITY
The SEM1801/2XR rail mount transmitter incorporates the latest digital technology to ensure accurate,
low drift performance.

SEM315 MKII

Universal, dual input, HART temperature transmitter

• HART 5,6,7 Compatible
• Dual RTD, Thermocouple, Potentiometer and mV Inputs
• Isolated Input to Output 4kV DC Flash Tested
• SIL Hardware Safety Integrity

The SEM315 MKII is a din-rail mount HART temperature transmitter (generic device) that is compatible with HART 5,6,or 7. It accepts RTD, Thermocouple, Potentiometer or millivolt input signals and converts them to the industry standard (4 to 20) mA transmission signal. Alternatively, HART multidrop mode can be selected.

Two inputs allow two sensors to be monitored at the same time over one output. Maths functions between the input sensors are available and the output is a function of the math function on the input.  The SEM315 MKII is programmed using a standard USB lead and our free configuration “USBSpeedlink” software downloaded from our web site. Standard features (HART generic device) can also be programmed using HART communication.

DIN-RAIL MOUNT HART TEMPERATURE TRANSMITTER FEATURE HIGHLIGHTS

SENSOR REFERENCING
The SEM315 MKII sensor referencing via the Windows based “USBSpeedlink” software allows for close
matching to a known reference sensor eliminating possible sensor errors.

USER CALIBRATION
In addition to sensor referencing, current output trimming is possible via the USB and HART commands.

CUSTOM LINEARISATION
The SEM315 MKII can be programmed with a custom linearization to suit nonstandard sensors or sensors
with unusual or unique characteristics. Consult the sales office for details.

SENSOR BURN OUT DETECTION
If a sensor wire is broken or becomes disconnected the SEM315 MKII output will automatically go to its user
defined level (upscale or downscale) or pre-set value.

OUTPUT CURRENT PRESET
For ease of system calibration and commissioning the output can be set to a pre-defined level anywhere
within the (4 to 20) mA range.
Hart® Registered trademark of the HART Communication Foundation.

SEM1615

Universal dual input temperature transmitter

• Dual RTD, Thermocouple, Potentiometer and mV Inputs
• 4/20mA loop powered
• Isolated Input to Output 4kV DC Flash Tested
• SIL Hardware Safety Integrity

The SEM1615 is a universal transmitter that accepts RTD, Thermocouple, Potentiometer or millivolt input
signals and converts them to the industry standard (4 to 20) mA transmission signal. It is programmed using a standard USB lead and our free configuration software “USB Speedlink” downloaded from our web site.

Two inputs allow two sensors to be monitored at the same time over one output. Maths functions between the input sensors are available and the output is a function of the math function on the input.

The output range and other operating parameters are easily programmed using our free software and a standard USB lead. Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the  transmitter to be calibrated to a particular sensor.

If you already know the specification you require, we can configure the product for you at no extra cost.

SEM1605THV

Thermistor, Pt1000 temperature transmitter with voltage output

• Suitable for Thermistor, Pt1000 or Pt500 temperature sensors.
• 3 wire (0 to 10) volt output.
• Other sensors available from our library available here.
• High stability.

The SEM1605THV is a DIN rail mounted Voltage Output temperature transmitter from Status Instruments. It has been
designed to accept most common thermistor temperature sensor inputs together with Pt1000 and Pt500 RTD inputs
and provide the user with a standard three wire (0 to 10) volt output signal. The output signal is linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard
USB cable between the SEM1605THV and your PC. Our free configuration software will guide you through any
changes you wish to make. To further help save time, the SEM1605THV does not need to be wired to a power supply
during the configuration process.

ACTIVE RANGE

The SEM1605THV is provided with a user push-button ranging option, allowing adjustments at both 0 V and 10 V against a live input. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation; during ‘user adjust’ it is also used to indicate the stage of adjustment. (0 and 10) V TRIM The buttons can also be used for 0 V and 10 V trim adjustment to add small offsets to (0 or 10) V output.

SENSOR REFERENCING

The SEM1605THV sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

SENSOR LIBRARY

The sensor type required is loaded onto the SEM1605THV from a software library using the USB-Speedlink software. The sensor library can be added to as new sensors become available or are requested. Thermistor sensors with a resistance value up to 100 K Ohms can normally be accommodated.

USB PC CONFIGURATION

The SEM1605THV is quick and easy to configure using a standard-type USB lead and the free-of-charge USBSpeedLink Windows software.

USB VIEW

The SEM1605THV can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1605THV.

STABILITY

The SEM1605THV DIN rail transmitter incorporates digital technology to ensure accurate low drift performance.

SEM1605TH

Temperature transmitter suitable for thermistor and Pt1000 sensors

• Accepts thermistors and Pt1000 sensors.
• Other sensors available from our library available here.
• (4 to 20) mA two wire output.
• Live data can be viewed on Android phone or tablet.

The SEM1605TH is a DIN rail mounted temperature transmitter from Status Instruments. It has been designed to
accept most common thermistor temperature sensor inputs together with Pt1000 and Pt500 RTD inputs and provide the
user with a standard two wire (4 to 20) mA output signal. The output signal is linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard
USB cable between the SEM1605TH and your PC. Our free configuration software will guide you through any changes
you wish to make. To further help save time, the SEM1605TH does not need to be wired to a power supply
during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605TH is provided with a user push-button ranging option, allowing adjustments at both 4 mA and 20 mA against a live input value. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation; during ‘user adjust’ it is also used to indicate the stage of adjustment. (4 and 20) mA TRIM buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to the (4 or 20) mA output.

SENSOR REFERENCING

The SEM1605TH sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

SENSOR LIBRARY

The sensor type required is loaded onto the SEM1605TH from a software library using the USB-Speedlink software. The sensor library can be added to as new sensors become available or are requested. Thermistor sensors with a resistance value up to 100 K Ohms can normally be accommodated.

STABILITY

The SEM1605TH DIN rail transmitter incorporates digital technology to ensure accurate low-drift performance.

USB PC CONFIGURATION

The SEM1605TH is quick and easy to configure using a standard-type USB lead and the free-of-charge USBSpeedLink Windows software.

USB VIEW

The SEM1605TH can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1605TH.

SEM1605TC

Thermocouple temperature transmitter PC programmable with push button calibration

• Suitable for thermocouples K J E N T R S L U B C G
• (4 to 20) mA loop powered output
• Push button Calibration Against Live Sensor Value
• View live data on an Android phone or tablet

The SEM1605TC is a rail mount thermocouple temperature transmitter from Status Instruments. It has been designed to accept most common thermocouple sensors and provide the user with a standard two wire (4 to 20) mA output signal. Galvanic isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605TC and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605TC does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605TC rail mount thermocouple temperature transmitter is provided with a user push button ranging option, allowing adjustments at both 4 mA and 20 mA for a live value. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation, during ‘user adjust’ it is also used to indicate the stage of adjustment.

(4 and 20) mA TRIM

The buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to (4 or 20) mA output.

SENSOR REFERENCING

The SEM1605TC sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor, eliminating possible sensor errors.

SENSOR BURN OUT DETECTION

If a sensor wire is broken or becomes disconnected, the SEM1605TC output will automatically go to its user defined level (upscale or downscale) or a pre-set value.

STABILITY

The SEM1605TC DIN rail transmitter incorporates the latest digital technology to ensure accurate low drift performance.

TEMPERATURE PROBES

Our range of temperature probes for use with this product can be seen here

SEM1605P

Pt100 temperature transmitter PC programmable with push button calibration

• Suitable for PT100, Cu100, Cu53, Ni100, Ni120 temperature sensors
• (4 to 20) mA Two Wire Output
• Calibration and Output Trim Without a PC
• View live data on an Android phone or tablet

The SEM1605P is a rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensors and provide the user with a standard two wire (4 to 20) mA output signal. All temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605P and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605P does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

ACTIVE RANGE

The SEM1605P is a rail mounted temperature transmitter provided with a user push button ranging option, allowing adjustments at both 4 mA and 20 mA for a live value. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out of range input during normal operation, during ‘user adjust’ it is also used to indicate the stage of adjustment.

(4 and 20) mA TRIM

The buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to (4 or 20) mA output.

SENSOR REFERENCING

The SEM1605P sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor eliminating possible sensor errors.

SENSOR BURN OUT DETECTION

If a sensor wire is broken or becomes disconnected the SEM1605P output will automatically go to its user defined level (upscale or downscale) or a pre-set value.

STABILITY

The SEM1605P DIN rail transmitter incorporates the latest digital technology to ensure accurate low drift performance.